Vision Controls

► Version: open frame drive in 92 x 85 x 22 mm, equipped with AMP connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.4 Amp. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600 and 3.200 steps/revolution. Setting by means of dip-switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

STEPPING MOTOR DRIVES:

Leveraging on our huge business competence and understanding of this particular realm, we are immersed in offering an extensive spectrum Leadshine Stepper Drive. In line with the quality morals pre-set by the industry, these presented products are highly demanded. Besides, these can be acquired from us in multiples stipulations at inexpensive rates in large orders.

Features:

• Impeccable performance
• Longer service life
• Precise engineering

Specification:

• Leadshine Stepper Driver 7.2A MA860H
• Digital Stepper Drive ( Upto 86 Kgcm Stepper motors ) CE Approved
• Applicable for 4, 6, 8 lead Stepper motors
• Supply Voltage: Upto 110V DC, 7.2A
• Upto 80V AC, 7.2A
• Supports PUL / DIR and CW/CCW modes
• Current: 2.9A to 7.8A Settable
• Automatic Idle Current reduction
• Clock Frequency: 0-300 KHz
• Allied Accessories: Pulse generators, Stepper motors , PLC , Motion Controllers, DC Drives

Vision Controls is the top service provider for industrial automation and instrumentation related solutions in Kerala . Our Services include VFD Servicing, PLC Programming, Site Servicing,Control Panel Building, Control Panel Repairing etc.
We provide our products and services across Kerala in all districts (Alappuzha,Ernakulam,Idukki,Kannur,Kasaragod,Kollam,Kottayam,Kozhikode,Malappuram,Palakkad,Pathanamthitta,Thiruvananthapuram,Thrissur,Wayanad )
Our products ( VFD , PLC , HMi, Sensors, Guages, Temperature Controllers etc ) and servicesare also available locally.

To rotate the step motor, switch the current supplied to the step motor coil to change the state of the electromagnet. There are multiple coils inside the motor, and rotation is controlled by combining the current supplied to those coils. The moment the coil current is switched, the motor's rotor rotates by a fixed angle. It is the driver's job to switch the coil current.

Vision Controls is the top service provider for industrial automation and instrumentation related solutions in Kerala . Our Services include VFD Servicing, PLC Programming, Site Servicing,Control Panel Building, Control Panel Repairing etc.

 

We provide our products and services across Kerala in all districts ( Alappuzha,Ernakulam,Idukki,Kannur,Kasaragod,Kollam,Kottayam,Kozhikode,Malappuram,Palakkad,Pathanamthitta,Thiruvananthapuram,Thrissur,Wayanad )

 

Our products ( VFD , PLC , HMi, Sensors, Guages, Temperature Controllers etc ) and servicesare also available locally.

 

► Version: drive housed in a metallic box in 110 x 108 x 34 mm, equipped with plug-in connectors.
► Range of operating voltages: 24-85 VDC.
► Range of current: 1.9 -6 Amps. Setting up to eight possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200, 6.400 and 12.800 steps/revolution. Setting by means of a dip- switch.
► Management of the current profile setting by means of a dip-switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Optoinsulated inputs to ensure best EM noise immunity.
► Warranty: 24 months.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

High-performance stepping motor drive with Modbus TCP/IP interface and STO Function (SIL3). - Optimized for coupling with R.T.A. stepping motors, fitted with encoder. - Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use.

ATTENTION!

This model is available only as spare part and is no longer produced for new applications.
The above picture is for illustrative purposes only, please refer to the product model.

► Series of ministep bipolar chopper drives with direct input from the main AC power supply (110-230 VAC) and an on-board programmable motion controller that can be used:
- for the interfacing, through RS485 serial line, with a central control system
- as an independent unit.
► Compact system equipped with dedicated instructions optimized for advanced motion control applications.
► Target: advanced applications requiring direct input from the main power supply and a programmable motion controller.

► Version: drive housed in a metallic box 152 x 129 x 46 mm, equipped with plug-in connectors.
► Range of operating voltages: 110-230 VAC.
► Range of current: 2.4-4 Amp. Easy setting of values by means of dip-switch.
► Microstepping: 400, 500, 800, 1.000, 1.600, 2.000, 3.200 and 4.000 steps/revolution. Setting by means of dip-switch.
► Automatic current reduction at motor standstill.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
-Overtemperature protection with thermal sensor.
► Optoinsulated inputs compatible with differential control signals.
► Possibility to switch off motor current with an external logic signal.
► High efficiency CHOPPER with IGBT final stage output.
► Electronic resonance damping circuit to ensure acoustic noise and mechanic vibrations reduction at low and medium speed.
► Alarm memory by use of yellow blinking led.
► External fans not needed.
► Coupling with stepping motors rated for high voltage and equivalent or bigger than NEMA 34 is mandatory.
► Warranty: 24 months.

► Version: open frame drive in 78 x 68 x 21 mm, equipped with AMP connectors.
► Range of operating voltages: 24-48 VDC.
► Range of current: 0.7-2.2 Amp. Setting up to four possible values by means of a dip-switch.
► Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
► Automatic current reduction at motor standstill.
► Management of the current profile setting by means of a dip-switch.
► Protections:
-Protection against under-voltage and over-voltage.
-Protection against a short-circuit at motor outputs.
► Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
► Warranty: 24 months.

► Stepping motor drives series with Step & Direction interface and direct input from the main AC power supply (from 110 VAC to 230 VAC).
► The drive is equipped with an internal rectifier able to transfer more than 330 VDC (230 VAC) to the motor, to ensure the maximum power for the application as well as a significant cost saving on transformer and rectifier, together with the related cabling activity.
► Target: advanced application requiring great dynamic performance, high reliability and semplified power supply.
► UL Listed